Mini Logo 8.38" Skateboard Trucks use premium alloy and precision axles providing a lightweight and durable skateboard truck. Sold as a set of two.
Baseplate Style
Standard
Quantity
Set of 2 Trucks
Truck Features
No Break-In Period
Mid Riding Height
Precision Axles
Ultra High Rebound Bushings
Lightweight Hanger/Baseplate
Lifetime Warranty
Features
Truck Features
No Break-In Period - No break in needed. Turn and grin smoothly right out of the package.
Mid Riding Height - Offers the best performance on any terrain you choose to skate.
Precision Axles - 8mm axles with a slightly curved hanger designed to lock you into grinds.
Ultra High Rebound Bushings - Offers a smooth ride with precise control.
Lightweight Hanger/Baseplate - The last thing you want is a pair of trucks that unnecessarily weigh you down, Mini Logo has ensured that is never their case with their trucks.
Lifetime Warranty - A warranty against manufacturer's defects.
Non-Compatible Risers
Risers from the following brands are not compatible with the baseplates of these trucks.
Loaded, Paris
Sizing Reference
Note - Every skate truck brand represents their sizing a little differently, so it's easy to get confused. Take a look at this graphic and then reference the size chart.
Specs
Size
8.38 axle
Hanger (mm):
146.05
Board Range (in):
8.25 - 8.75
Height (mm):
47.5
Weight (g):
346.3
Reviews
4.5
Overall Rating
Reviewed by
16
customers
Great product
by Thomas Scott
in Daphne, AL(Verified Buyer)
Posted on 9/10/2024
Mini Logo MiniLogo 8.38" Skateboard Trucks - raw
Great customer service and fast shipping! Killer Shop!
0person has found this review helpful
Great product
by Conan Camacho
in Tamuning, GU(Verified Buyer)
Posted on 5/3/2024
Mini Logo MiniLogo 8.38" Skateboard Trucks - raw
Great trucks for skating
0person has found this review helpful
decent cheap truck
by sylvia
Posted on 5/18/2023
Mini Logo MiniLogo 8.38" Skateboard Trucks
Decent for the price but it has its flaws, kingpin clearance is AWFUL i could'nt get a good smith in with how bad it is. The truck does grind pretty well and the bushings are crap same with the pivot cups. I found that standard thunder bushings and thunder or indy pivot cups make theses trucks so much better. The bushings loose their rebound over time and they are pretty hard too. if you knocked out the kingpin and put a reverse kingpin in itll make these trucks a lot better
0person has found this review helpful
Good Trucks
by Vincent Messineo
in Sacramento, CA(Verified Buyer)
Posted on 10/30/2022
Mini Logo MiniLogo 8.38" Skateboard Trucks - raw
I was surprised by how much I liked these. They feel stable like Thunders but a bit less so than Thunders. They feel a bit like Indys when you wiggle them side to side but they don't turn quite as sharp as Indys but pretty close. They are low so you will need risers if you have bigger wheels. I think if you are someone who goes back and forth between Thunder and Indy this could be your truck.
1person has found this review helpful
Not skating every day
by Devin Shea
in Holland, MI(Verified Buyer)
Posted on 7/25/2022
Mini Logo MiniLogo 8.38" Skateboard Trucks - raw
I don't put my stuff through their paces like I used to. That being said, these have been great for a second set up. I don't know how they'd hold up if I skated harder but I'm over 30 so I don't expect as much.
1person has found this review helpful
Really good trucks
by Josh
in Fort Myers, FL(Verified Buyer)
Posted on 6/5/2022
Mini Logo MiniLogo 8.38" Skateboard Trucks - raw
Bought these because I had lost pop and wanted to try a low truck. Blown away with their performance. They turn like a high, surfy truck. I usually never tighten my trucks from the factory but had to with these. They also grind very well. I honestly would compare these to any of the major truck companies. If you’re thinking about trying them, do it.
4people have found this review helpful
Asked by Newt on 4/30/2014
okay, for the 20 whatever dollars these are at right now, ist that the set of trucks, like both of them, or is it per truck?
Answered
by James S
(Tactics Employee)
on 4/30/2014
